|
|
| - |
JH Town of Culture Towers in Santiago de Compostela |
- |
Name: JH Town of Culture Towers in Santiago de Compostela
Architect: Jhon Hejduk, Elena Cánovas y Antonio Sanmartín (Asz arquitectes)
Builder: U.T.E. NECSO S.A. / COPASA
Execution date: March 2002 - May 2003
Granite: Azul Extremadura honed
System of placing of the the facade: PROESGA (A Coruña)
|
| |
Description:
The structure of the tower
of granite does from
square profiles of 100mm
and bracing to the
backfill and line it entirely
with heet of steel of 5mm of
thickness. The anchorages to
support the pieces of granite
will fix to the diffuse structure
done of square tubes.
|
ENVELOPES
51-Copper hemming t:0,8 mm
52-Rubber or neoprene washer
53-“L” shapped aluminium part anchoring to the main structure (UNYCLAD system or similar)
54-Vertical aluminium mast with toothed finish (UNYCLAD system or similar)
55-Horizontal aluminium section screwed to the vertical masts supporting the plate (UNYCLAD system or similar)
56-Anti-tip retention clips (UNYCLAD system or similar)
57-Granite 3:3 cm mínimum part 60x60 cm
61-Compression bolt for fixing to main structure
62-Zinc-plated steel embossed sheet levers with 2 arms at 90º (HALFEN-DEHA or similar)
63- Zinc-plated steel embossed sheet levers with 2 arms at 180º (HALFEN-DEHA or similar)
64-Stainless steel GLASSMAN DG-20-12-75 (HALFEN-DEHA or similar)
65-Tempered glass with PARSOL 6x592x1198 mm strip, with vertical joints marked with acid every 300 mm
66-Joint sealed with neutral silicone
67- Tempered glass with PARSOL 6x1198x340 mm strip, with vertical joints marked with acid every 300 mm
Details of the put in work of the cladding of granite in the tower
|
Vertical constructive section of the two towers (glass and granite)
|
|
|
986 348 964
info@fctgranito.es
mapa web | cómo llegar | descargas | enlaces
Pavement implementation
Works with ventilated facade
