ES / EN
   

Implementation

 
- Municipal Exhibitions and Congress of Ávila -
Name: Municipal Exhibitions and Congress of Ávila
Architect: Francisco Mangado
Builder: Volconsa S.A.
Execution date: 2005 - 2009
Granite: Amarillo Villarreal abujardado y arenado
Placer: Sucomaga (Madrid) www.sucomaga.com
System of placing of the facade: Sucomaga (Madrid) www.sucomaga.com
Description:
Ventilated facade of granite Villarreal of 5cm of thickness, fixed with punctual anchorage of stainless steel type Z100x40x5mm on structure of armed concrete.

False ceiling of granite of 4cm, fixed by means of punctual anchorages double type Z40x40x3mm to tubular substructure hanged of stainless steel 50x30x3mm.

Floating cover realised with granite of 4 cm of thickness on plots of PVC regulables. Cover formed by planes bent realised with granite of 4 cm of thickness fixed by means of punctual anchorages type Z40x40x3mm to structure of stainless steel 40x40x3mm.

To the right they show images of the development of the execution of the ventilated facade, from the wall going through the placing of the metal section until the placing of the cladding of yellow granite Villarreal.

Cover hit to the estrucutra of granite (finished cut- quarry) with mechanical anchorage. Underneath it goes anchored to a cover formed by smooth sheet 8mm+layer compression HAS-25 and:8cm +plate of pvc+poliestireno extruído and: 5cm+geotextil +mortar of protectio.

1. Forged composite slab (Aceralia or similar) PL58/150 (esp. depending on structure).
2. Forming of lightened concrete slope.
3. PVC waterproofing lamina.
4. Extruded polystyrene e=5 cm.
5. Geotextile lamina.
7. Roofing granite on PVC plots; e=5cm.
10. Reinforced concrete wall e=40 cm.MH-40.
11. Exterior projected polyurethane insulation + plastic paint =5cm+air chamber+exterior granite covering e=78cm obtained by splitting with wedges, AE-pi1(natural finish on the split).
12. Concealed galvanized steel folded sheet gutter e=3mm.
13. Ext. Carpentry +6+6 mm glazing with sandwiched translucent Butiral (according to technical specs)
14. Double external + carpentry glass 10+10mm with interposition of butiral transparent (according to esp. technicians)
15. Reinforced of concrete of arlita and:10cm + layer of mortar with armed upper and:4cm.
18. Exterior 10x10x10 cm cut granite block with key mortar
24. Draining lamina (Delta-drain type) + geotextile fitted on bituminous primer. AE-imp 4.
38. Cub.sheet colb. PL150/59+ layer compresion HAS-25. layer of pvc + extruded polystyrene e:5cm + extruded polystyrene e:5cm + geotextile + mortar of protection.
39.Granite covering (cut-quarry finish) with mechanical anchoring.
40. Exterior sealing formed by sheet iron e=10 mm.
41. Carpentry of glass of 5+5mm with interposition of fibre of glass.
42. Reinforced concrete wall e:25mm HA-25.
43. Wall of block of concrete vibratepressing 40x20x10 MB-10.



Detail of punctual anchorage in ventilated facade

It detail subjection of false ceiling of granite
 
 










FCTGG © 2012 |  Centro Tecnológico del Granito Ribeira, S/N, Torneiros. 36410 | O Porriño (Pontevedra)
986 348 964     info@fctgranito.es Área privada   mapa web | cómo llegar | descargas | enlaces
página promocionada por:

© Ideaspropias Publicidad